Metal Primer RAL 9002 Grey white

Type of paint: Metal Primer
Color code: RAL 9002 Grey white
Gloss level: Matte

Viscosity: 5 - 7 Poise
Density: 1.45 - 1.50 g/cm³
Theoretical coverage:
10 - 12 m² per liter, depending on application method, layer thickness, and substrate.

Solids content: 45 - 48 vol%
Drying time (20ºC):
Dust dry: approx. 10 min
Tack-free: approx. 30 min
Through-dry: approx. 1 hour

Thinning: If necessary, dilute with water
Flash point: >100ºC
VOC content: This product contains < 30 g/l

APPLY METAL PRIMER IN 3 STEPS

A solid base layer is essential for a long-lasting finish. Pauw Coatings Metal Primer provides excellent adhesion and rust protection, ensuring your metal paint performs at its best. Follow these three essential steps for the best results.

1. CLEAN & PREPARE

A well-prepared surface ensures better adhesion and longer durability.

Surface Preparation

• Remove loose rust and old paint with a wire brush, sandpaper, or rust remover.
• Lightly sand the metal for better adhesion.
• Fill cracks or surface imperfections if necessary.

Cleaning

• Thoroughly clean the metal with water and a mild detergent.
• Avoid aggressive chemicals, as they can affect the primer’s adhesion.
• Ensure the surface is completely dry and dust-free before starting.

💡 Tip: Want a specific color finish? Choose a primer that matches your final color, such as Metal Primer RAL 1000 Green Beige, for a uniform result.

2. CHECK CONDITIONS

Proper conditions ensure optimal drying and adhesion of the primer.

Weather Conditions

• Do not paint below 10°C and avoid painting in high humidity.
• Protect from rain and direct sunlight for even drying.
• Consider wind conditions when painting outdoors to prevent dust and dirt contamination.

Storage & Use

• Store the primer between 5°C and 30°C to maintain quality.
• Stir the primer well for an even color and consistency.

💡 Tip: Use Metal Primer RAL 1000 Green Beige as a base for Metal Paint in the same color for optimal coverage.

3. APPLY PRIMER & OVERCOAT

A smooth application ensures the best adhesion and protection.

Test a Small Area First

• Unsure about the color or finish? Test a small area and let it dry.

Applying the Primer

• Use a brush, roller, or spray gun depending on the application.
• Apply at least one to two thin coats for the best adhesion and protection.
• Allow the primer to dry completely according to the recommended drying time before overcoating with metal paint.

💡 Tip: After priming, use a high-quality metal paint, such as Metal Paint RAL 1000 Green Beige, for a long-lasting and scratch-resistant finish.

🚀 Order your Metal Primer RAL 1000 Green Beige now and create the perfect base for your metal surfaces!

At Pauw Coatings, we take pride in our products. All our paint and coating products are made fresh at the time of your order. This ensures that you receive the highest quality product every time.

Order Processing:
All orders are processed and shipped within 1 to 3 working days. Once your order is dispatched, you will receive a confirmation email with tracking information.

Delivery Times:
Delivery times vary depending on your location. Please note that delivery times are estimated and may vary due to factors beyond our control, such as customs processing and local delivery conditions.

For any questions or concerns regarding your order, please contact our customer service.