Wood stain RAL 1018 Zinc yellow

Paint Type: Wood stain
Finish: Matte
colour Name: RAL 1018 Zinc yellow

Viscosity: 30 - 40 sec. DIN 4
Density: 1.03 – 1.15 g/cm³
Solids content: 25 - 30%

Theoretical Coverage:
8 - 11 m² per liter (depending on application method, layer thickness, and substrate)

Drying Time (at 20°C):
Dust dry: approx. 15 min
Tack-free: approx. 45 min
Touch dry: approx. 1.5 hours
Recoatable: approx. 16 hours

Thinning: Do not thin
Flash point: >100°C
VOC content: < 30 g/l

APPLY WOOD STAIN IN 3 STEPS

Do you want to protect wood from weathering and greying while keeping the natural grain visible? Pauw Coatings Wood Stain provides a durable, moisture-resistant, and UV-protective finish. Follow these three steps for the best results.

1. CLEAN & PREPARE

Proper preparation ensures even stain absorption and long-lasting protection.

Surface Preparation

• Lightly sand the wood to open the grain and ensure optimal adhesion.
• Remove loose paint layers or old stain with sandpaper or a paint scraper.
• Fill cracks and holes with a suitable wood filler for a smooth finish.

Cleaning

• Wipe the surface clean of dust and grease with a damp cloth or mild detergent.
• Avoid aggressive chemicals, as they can affect stain adhesion.
• Allow the wood to dry completely before staining.

💡 Tip: Use Wood Stain RAL 1018 Zinc yellow for a natural, stylish finish that perfectly matches your wood project.

2. CHECK CONDITIONS

The right application conditions ensure even drying and stain absorption.

Weather Conditions

• Do not apply below 10°C or in high humidity.
• Avoid painting in direct sunlight or rain.
• Ensure proper ventilation when used indoors.

Storage & Use

• Store the stain between 5°C and 30°C to maintain quality.
• Stir well before use for an even color and consistent coverage.

💡 Tip: Choose a color that fits your project! Our wood stain is available in RAL shades like RAL 1018 Zinc yellow, perfectly suited to your needs.

3. STAIN & FINISH

Proper application ensures a beautiful finish and maximum protection.

Test a Small Area First

• Unsure about the color or finish? Test the stain on an inconspicuous area and allow it to dry completely.

Applying the Stain

• Use a brush, roller, or spray gun depending on the surface.
• Apply at least two coats for optimal coverage and protection.
• Wait at least 16 hours between coats for the best adhesion.
• Allow the stain to cure fully before exposing the wood to moisture and dirt.

💡 Tip: Use RAL 1018 Zinc yellow for a timeless and natural look, perfect for wooden cladding, fences, and garden furniture.

🚀 Order your Wood Stain RAL 1018 Zinc yellow now and give your wood a durable and protective finish!